The Robot Coupe Robot Cook is a versatile food processor that can not only chop, mix and grind food, but also cook it. Needless to say, the Robot Cook is great for any commercial kitchen setting. However, if something’s not right and you’re seeing an error code but aren’t sure what it means, we’ve got just the guide for you. Take a look at our Robot Coupe Robot Cook error code breakdown and know how to remedy the situation.
Error Code
|
Problem
|
Solution
|
Er01
|
Thermal variator has cut-out
|
Let the unit cool down then press the “Stop” switch to reset
|
Er02
|
Thermal motor’s cut out
|
Let the machine cool down, let it run faster or use the intermittent setting 0101
|
Er03
|
Issue with power supply
|
Check unit’s power supply
|
Er04
|
Incorrect accessory configuration
|
Dismantle and reassemble all accessories then press the “Stop” switch to reset
|
Er05
|
Internal bus over-voltage
|
Check the power supply and/or have checked by authorized service technician
|
Er06
|
Thermal cut-out control board
|
Let the unit cool down then press the “Stop” button to reset
|
Er07
|
Bowl is out of alignment and unsafe
|
Remove the bowl and replace in proper alignment to reset safety features
|
Additional Messages
| __ |
Contact authorized service technician
|
For more troubleshooting help, cleaning instructions and more, take a look at your collection of Robot Coupe manuals.
Please contact a local authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.
