How to Clean a Convotherm Combi Oven
The Convotherm 4 combi oven is not only a vital asset in your commercial kitchen, but it also makes daily tasks like cleaning a breeze. Thanks to its innovative easyTouch automatic cleaning system, you can safely clean and sanitize the interior chamber of your combi oven at the touch of a button. The instructions below show you how to start and run an automatic cleaning cycle for the Convotherm 4 easyTouch combi oven.
While this guide is to help commercial kitchen operators clean the interior of your combi oven, please contact an authorized service technician to make necessary repairs or resolve any potential problems should they occur during the cleaning process.
Setting Up the Fully Automatic Cleaning Profile
You’ll need to set up your cleaning profile on the combi oven’s touchscreen prior to starting a cleaning cycle.
- Step 1. Press the “clean” button on the Homepage of the touchscreen interface.
- Step 2. Once on the “Clean” page, select “ConvoClean+.”
- Step 3. Choose the cleaning level needed:
- Cleaning Level 1: Light soiling
- Cleaning Level 2: Moderate soiling
- Cleaning Level 3: Heavy soiling
- Cleaning Level 4: Extreme heavy soiling
- Step 4. Select the mode you want based on the time needed to clean.
- Step 5. Select any extra functions like “Steam Disinfection” or “Drying” if you so choose.
Once you’ve configured your cleaning profile, you can now begin a cleaning sequence.
How to Start a Cleaning Sequence
Before you begin any cleaning sequence, refer to your user’s manual to learn about the hazards, risks and rules so that you can safely clean and operate your Convotherm 4 combi oven. Be sure to also fully read the directions for any cleaning sequence.
- Step 1. Press “Confirm” to begin the cleaning sequence. Your cleaning profile will begin immediately.
- Step 2. Stop the cleaning sequence by pressing the “Stop” button. You can only stop the cleaning sequence if no cleaning agent has been added.
Different Cleaning Sequences
The Convotherm 4 combi oven also offers various cleaning sequences depending on the level of cleaning you need done. These other cleaning programs will operate similarly to a standard fully automatic cleaning sequence, but with some unique variations. The two main cleaning options include:
- ConvoClean+—A fully automatic cleaning process that includes the use of cleaning agents supplied through connected canisters.
- Semi-Automatic—A cleaning sequence that issues prompts to indicate the next step.
Additional process steps you can include in a cleaning sequence include H2O (water rinse), ConvoCare (rinse with ConvoCare rinse aid from a canister or single dose). For more tips on cleaning a commercial kitchen and equipment, turn to Parts Town on your basic cleaning needs.