Skip to Navigation Skip to Content

Kolpak Walk-In Cooler & Freezer Troubleshooting

Guide
  • #Kolpak
  • #Refrigeration
  • #Troubleshooting
Walk-in Fridge - Kolpak walk-in troubleshooting

Regular maintenance is important to keep your Kolpak walk-in equipment running smoothly. If you run into an issue, we can help you find the troubleshooting tips you need to get your walk-in cooler or freezer up and running again.

Common Issues

Walk-in coolers and freezers can leak, over-freeze and even stop working. When these issues arise, keep our troubleshooting tips in mind. Here are some common problems and ways to fix them:

Cooler is Freezing

Melt the ice off of the evaporator and check that the fan is running properly. Next, check the coil for debris and clear the drain line.

Unit Won’t Stay Cool

Check that the temperatures, subcooling and operating pressures are normal. Also check that the door gaskets are sealing properly. The issue may also be from the compressor turning off too early. This means you’ll need to replace the compressor.

Unit Isn’t Running

Make sure the unit is plugged in and turned on. If the unit still isn’t getting power, then check the outlet. If there’s no issue with the wiring, then you’ll need to contact a certified technician.

Tips to Keeping Your Kolpak Walk-In Running Smoothly

  • Keep all surfaces clean and free of spilled liquids and food particles.
  • Inspect the function of the evaporators, drain pan heaters, defrost controls and drain line heaters regularly.
  • Drain the condensate drain line regularly.
  • Inspect the door hardware and sweep gasket monthly.
  • Use mild detergent and water to regularly clean all metal surfaces, magnetic door gaskets and door sweep gaskets.

For more help with maintenance and troubleshooting, browse our collection of Kolpak manuals.

Please contact a factory authorized service agent who can help with these specific units and all your commercial kitchen equipment needs.