Fisher Backsplash Mount Faucet Installation
A Fisher backsplash faucet offers a reliable and convenient solution for handwashing and warewashing. And the best part is that they’re easy to install in your commercial kitchen. Follow the steps below to install your new Fisher backsplash mount faucet.
Supplies You’ll Need:
- Adjustable wrench
- Teflon tape
Faucet Installation
- Step 1–Assemble the flange onto the concentric for one side of the faucet.
- Step 2–Install one of the washers inside the concentric.
- Step 3–Attach the concentric assembly onto the faucet body.
- Step 4–Repeat Steps 1-3 to assemble the concentric for the other side of the faucet.
- Step 5–Attach the faucet body assembly onto the backsplash.
- Step 6–Lock the faucet body onto the backsplash using the provided washer and lock nut. Place the lock nut and then washer onto the threaded concentric nipple.
- Step 7–Tighten the nuts on each of the concentrics by hand first, then with an adjustable wrench to ensure the faucet body assembly is securely tightened onto the backsplash.
- Step 8–Next, install the swing spout. Prior to installation, lubricate the o-rings. This ensures that the swing spout will be able to move easily and keep the o-rings in their place.
- Step 9–Insert the end with the spout nut into the faucet body. Make sure that the spout is being inserted properly and it isn’t crooked. Once the spout is firmly installed into the faucet body, tighten the spout nut by hand first then with the adjustable wrench.
- Step 10–Wrap Teflon tape onto the threads of the concentric nipples, which are now on the back of the backsplash.
- Step 11–Install the elbows onto the concentrics. Hand tighten, then tighten with the adjustable wrench. Your water supply line can now be attached.
Need more installation or maintenance instructions? Browse our collection of Fisher manuals for help.